View Gaps and Inversions in One Chart
The preview chart draws the 5-minute Nasdaq bars and the inverse fair value gaps the scanner found. The dashed line is the price the 1-minute check uses. There is no toggle for gaps, symbols, or timeframes.
This tracker follows Nasdaq only, in the forms US100.sim, US100.cash, NAS100, and US100. It runs the same scan as the original tracker: 15-minute bias, 5-minute gaps, and a 1-minute rejection. It only tracks during the New York kill zone (9:30–11:00 AM ET) and the Asia kill zone (8:00 PM–12:00 AM ET).
Market
Nasdaq-100 only
Tracked forms: US100.sim, US100.cash, NAS100, US100. Signals only. No order is sent.
Connecting…
14:11:15 ET
Asia opens in 5h 49m
NY 9:30–11:00 AM ET · Asia 8:00 PM–12:00 AM ET
This tracker only tracks during the New York and Asia kill zones. Outside those hours it monitors and does not list a setup. For best results, do not leave a trade open for more than 3 minutes.
Fixed scan: 15-minute bias, 5-minute fair value gaps, close through the gap, then a 1-minute rejection. Timeframes and the inversion rule are not choices.
Preview only. This is not a live Nasdaq price. No order is sent.
A chime plays with each new alert. No order is sent.
Outside kill zone — monitoring only. A setup is listed here only during the New York or Asia kill zone, and only when price is in an IFVG. This preview already has a bullish IFVG with a 1-minute rejection. It stays off the list until a kill zone opens.
Outside kill zone — monitoring only
When the green dot is on, the chart is the live Nasdaq feed. Alerts are listed only inside the New York and Asia kill zones.
For best results, do not keep a trade open for more than 3 minutes.
Built for studying the chart, not chasing a signal
This tracker only lists a setup when its Nasdaq rules are met inside a New York or Asia kill zone. It does not place a trade. For best results, do not keep a trade open for more than 3 minutes.
The preview chart draws the 5-minute Nasdaq bars and the inverse fair value gaps the scanner found. The dashed line is the price the 1-minute check uses. There is no toggle for gaps, symbols, or timeframes.
The alert list is the notification. When price is inside a 5-minute IFVG during the New York or Asia kill zone, the tracker lists the setup. If the 1-minute rejection is also there, it lists that entry as good. Nothing is sent to a broker.
An inversion on this tracker is a candle close through the gap, the same rule as the original scanner. A wick through the gap does not count, and there is no setting to switch that.
The scan does not ask you to pick a timeframe. Bias comes from the last five 15-minute bars. Gaps and inversions come from the 5-minute bars. The entry check uses the last two 1-minute bars.
You can view the Nasdaq preview without logging in. This tool does not ask for a symbol, a timeframe, or an inversion rule. If a live feed is added later, it will still be Nasdaq only.
Many inverse fair value gap pages begin by discussing a specific model, or with a video hook. To understand what a fair value gap is, how inverse fair value gaps are formed, and common points of contention among traders, continue reading below. If you are familiar with inverse fair value gaps, feel free to skip to the chart.
Four short steps, then you are looking at the chart
Step 1
There is no symbol box and no timeframe button. The tracker watches Nasdaq in the forms US100.sim, US100.cash, NAS100, and US100. The chart on this page is a preview of that scan, marked so it is not mistaken for a live quote.
Step 2
Once the candles have loaded, areas where there has been a 3 candle imbalance will be displayed. This occurs where the range of the middle candle is not covered by either the wick of the previous or next candle. This untraded area in between is a fair value gap. Both bullish and bearish gaps will be colored differently to help you. However, to ensure readability, even if the colors cannot be seen, they follow a pattern.
Step 3
A gap becomes an IFVG only when a later 5-minute candle closes through it. A bullish fair value gap that closes below the zone is a bearish IFVG. A bearish fair value gap that closes above the zone is a bullish IFVG. Wicks do not invert a gap on this tracker.
Step 4
During the New York kill zone (9:30–11:00 AM ET) or the Asia kill zone (8:00 PM–12:00 AM ET), a setup is listed when price is in the IFVG. If the 1-minute rejection is there, the tracker also lists the entry. Outside those hours it only monitors. If you take a trade, do not leave it open for more than 3 minutes. This page does not send orders.
A short explanation, without a sales pitch
Inverse fair value gaps (or Inversion fair value gaps) may be referred to as IFVGs or Inversion Fair Value Gaps. Both terms mean the same thing and may be used interchangeably within the same thread. They originate from price action strategies, often referred to as ICT or smart money strategies. The simple explanation is that fair value gaps occur after a strong 3 bar move, and inverse fair value gaps are simply fair value gaps that have been reversed at a later point in the chart.
This is a form of analysis and not a rule in trading. Support/resistance or failure may occur at these inverted gaps, just like any other zone. On this page, we will not give the impression that there is one set rule book.
Fair Value Gaps (FVGs) typically occur after three consecutive candles. Where the wick of the 1st bar does not overlap with the wick of the third bar, a section of price in the middle bar has not been traded. In a bullish gap, this will appear between the high of the 1st bar and the low of the third bar after a strong upwards movement. In a bearish gap, this will appear between the low of the first bar and high of the third bar after a strong downwards movement.
This imbalance in price is often considered by traders to be an area that price may return to. Sometimes this occurs, sometimes it doesn't. Not all fair value gaps will be filled. If anyone says they always will, they are exaggerating.
An IFVG occurs when price moves through a fair value gap in the opposite direction to that of the original gap. If a bearish FVG was present, and then price moves upwards through this gap, it may be considered a bullish IFVG. Conversely, if a bullish FVG is present, and then price moves downwards through it, it may be considered a bearish IFVG. In both cases, some traders may consider this area to be potential support/resistance levels.
It is often skipped in many videos. It should simply be noted that this is a label applied to something that had already occurred in the chart. Whether price respects the support/resistance levels when tested again in the future has to be determined by looking at the chart. As such, the tracker cannot predict whether or not it will be respected.
Sometimes you may see this referred to as an inversion fair value gap, an inverse fair value gap, or IFVG. For most public pages and videos, all 3 terms mean the same thing. On this site, we will use IFVG and inverse fair value gap interchangeably. We will also mention inversion fair value gaps, as the term appears just as frequently. There is nothing further within the pattern for either of these terms.
A bullish IFVG is formed when a bearish FVG occurs, and then price moves upwards through it. Traders may look to consider entering long positions in this zone once price subsequently falls back into this range. Conversely, a bearish IFVG is formed when a bullish FVG occurs, and then price moves downwards through it. Traders may look to consider entering short positions in this zone once price bounces back into this range.
The word "potential" has been used here for good reason. Simply identifying a painted area in this pattern is not a reason nor evidence for a change in momentum.
There is some disagreement within this pattern. Some traders will consider the gap to be inverted if a wick crosses this level, whereas others will only consider the gap to be inverted when the candle has closed past the outside of the gap. In some rare cases, people will have rules on how an inverted gap can become invalid. Often this happens if price crosses back through the inverted gap in the opposite direction.
Within IFVG Trading, a gap is inverted only when a candle closes through it. That is the scanner rule, and it cannot be switched to a wick. A wick through the gap leaves the zone as a fair value gap.
For studying markets, not for copying someone else's model
If you are just getting to grips with this strategy or concept, then it can be very helpful to see many examples. Include messy examples. Load a liquid market and walk through the session. Observe how the gap occurs, how traders reacted and how the price behaved afterwards. Pause the example at messy and clean examples. Once you have seen multiple examples, the description above will make more sense.
Once a session has completed, this list of zones allows you to quickly review the session, rather than trying to manually scroll through or remember where the gaps were. You can note down which inversions you found, missed, and whether you would have acted the same. This tool can be used to help you review a session, but will not advise you on what you should do.
Leave this page open for Nasdaq. Alerts are listed only during the New York and Asia kill zones, and only when the scanner says the setup is there. This is not an order and not a promise of a result. If the feed is delayed, you are behind the live market. If you do trade a listed setup, do not keep it open for more than 3 minutes.
Bias is read from the 15-minute chart. The gap is read from the 5-minute chart. The rejection is read from the 1-minute chart. You do not switch timeframes. Agreement between those three does not guarantee a result.
Read this before you treat a zone as a reason to trade
This is a learning tool. We are not offering a trading service, we are not executing any trades on your behalf, and none of the information on this page constitutes financial advice.
This tool should be regarded as educational only. No financial advice, investment advice or recommendation to buy or sell assets is being given. Nothing on this site constitutes an offer or invitation to invest, or an indication of future price movements.
Trading futures, forex, equities, crypto and other markets carries risk of losing money. More money could be lost than expected. Some products allow for losses in excess of the amount invested. Previous price movements in fair value gaps/IFVGs cannot be relied upon to indicate what will happen in the future.
Zones are generated from a set of rules. These may vary slightly to those shown in videos/PDFs. This includes rules for considering wicks and closes, and removing inverted zones. If two tools show different results for a particular candle, this is often a result of differing definitions.
Prices may be delayed, low-volume or messy. This may occur around market openings, pauses, weekends and low liquidity. Gaps in delayed/incomplete data may differ from what would be observed on a live professional feed. Additionally, candle formation may vary depending on the platform. This means wicks (and therefore gaps) may be plotted differently on different platforms.
This tool is not a broker, copy-trading tool or signal. We do not know your account size, risk tolerance, or the rest of your charts. If you do choose to trade, ensure you are using a trustworthy platform and risk management strategy. It may also be a good idea to get advice from a professional who is qualified to understand your specific situation. If you cannot afford to lose money, then you should not be trading with it.
No account is required. The page does not ask for a symbol. Nothing you view here is sold as a list of markets. How long any technical information is kept is covered in the privacy policy. In order to be transparent regarding [PRIVACY_PROCESS], the privacy policy should accurately reflect this prior to the site becoming more public.
Straight answers, including the ones that usually get a sales pitch
An Inverse Fair Value Gap (or inversion fair value gap) is a type of price behavior. It occurs when price moves into a fair value gap in the opposite direction to the original move that caused it.
A fair value gap is formed by three non-overlapping candles meaning that part of the middle candle was not traded on the wicks. An IFVG occurs once price has moved into this gap in the opposite direction. The FVG is just an imbalance in price. The IFVG is just the inverse of this imbalance.
Both terms are commonly used. Both have been used in this site to ensure users searching for both variations can still find the content. However, if you are using "inverse" and "inversion" fair value gaps to mean different rules, then please make this clear as it is not common practice.
This tracker marks an IFVG only when a candle closes through the gap. A wick through the gap does not count, and there is no control to switch rules.
A bullish IFVG occurs when a bearish fair value gap is entered in an upward direction. A bearish IFVG occurs when a bullish fair value gap is entered in a downward direction. These do not indicate that the price will behave this way on re-test.
There is no one correct entry strategy. Many traders will wait for liquidity in a sweep, then price closing past the fair value gap, before entering once price returns to this region. Other traders may incorporate further elements, such as higher timeframe bias or comparisons between correlated pairs. None of these strategies have been validated or given scores by this tool. If you decide to implement any of these strategies, make sure to test them and consider them unproven until tested.
Balanced Price Ranges (BPRs) are a term used by some traders to describe two opposing fair value gaps overlapping. An IFVG is simply where price enters into a single fair value gap. The fair value gap is therefore considered to be inverted. Although related, these are not the same pattern. This tool works with fair value gaps and inversions and cannot automatically detect BPRs.
It does not ask you to choose. Bias is the last five 15-minute bars. Fair value gaps and inversions are read on the 5-minute bars. A setup is confirmed only if the last two 1-minute bars show the rejection.
No. Some fair value gaps will be filled, others will not. Do not assume that fair value gaps will be filled in order to place a trade.
No. This is a web page with charting functionality. It is not a TradingView script and has no affiliations with TradingView or any IFVG indicators within TradingView. If you currently trade in TradingView, you may continue to do so. This is a completely separate web-based tracker.
Nasdaq only, in the forms US100.sim, US100.cash, NAS100, and US100. There is no symbol field. The tracker only lists setups during the New York kill zone (9:30–11:00 AM ET) and the Asia kill zone (8:00 PM–12:00 AM ET).
No. This tracker does not require an account. If future features require logins, this will be to save user preferences and will not be a barrier to using the tracker.
No. This is not financial advice and should not be taken as such. We have no knowledge of your financial situation and do not recommend any trading. If you are in need of advice, please consult a qualified professional. If you are trading, you accept that you may lose money.
On this page, we only explain the concept of IFVGs and mark regions. We do not offer mentorship, live signals or a win percentage. If you are looking for someone to tell you what to trade, this is not the place. Be wary of pages that promise this.
To see the Nasdaq preview and the alert list, return to the top of the page. This tracker only runs during the New York and Asia kill zones. If you trade, do not keep it open for more than 3 minutes.